The Levoit Core 200S is a compact smart air purifier engineered for single-room use specifically for spaces up to 183 square feet (17 square meters) under typical residential air quality conditions. It combines a 360-degree cylindrical air intake with a three-stage filtration system, a brushless DC motor, and Wi-Fi connectivity for control via the VeSync mobile application. Despite its entry-level market positioning, the Core 200S contains engineering choices that are worth understanding in detail particularly for owners who want to optimize performance, source compatible replacement parts, or troubleshoot mechanical and electrical issues accurately.
This reference document compiles every publicly available and independently verified technical specification for the Core 200S, organized by system category, with contextual explanation of what each specification means for real-world performance and maintenance.
PHYSICAL DIMENSIONS AND WEIGHT
The Core 200S has a cylindrical form factor, a deliberate design choice that enables the 360-degree intake around the lower body perimeter.
- Overall height: 11.8 inches (30 cm)
- Base diameter: 7.5 inches (19.1 cm)
- Weight (unit only, without filter): 4.85 lbs (2.2 kg)
- Weight (unit with filter installed): 5.73 lbs (2.6 kg)
The cylindrical profile requires a minimum clearance of 15 cm (6 inches) on all sides from walls, furniture, and other obstructions. Restricting the 360-degree intake by placing the unit in a corner or directly against a wall reduces the effective airflow drawn into the filter and measurably decreases CADR performance. Levoit’s placement recommendation, center-of-room or at minimum 15 cm from any vertical surface, is an engineering constraint, not a stylistic preference.
The base diameter of 7.5 inches means the Core 200S occupies a footprint of approximately 44 square inches, smaller than a standard sheet of paper. This compact footprint makes it suitable for desk placement, nightstand use, and small bedroom corners where larger rectangular purifiers cannot be positioned without blocking floor space.
CADR RATINGS AND COVERAGE AREA
CADR (Clean Air Delivery Rate) is the standardized metric for air purifier performance, measured in cubic feet per minute (CFM) or cubic meters per hour (m³/h). It quantifies how quickly a purifier delivers filtered air into a space, combining filter efficiency with airflow volume into a single performance number.
- Dust CADR: 95 CFM (161 m³/h)
- Pollen CADR: 98 CFM (166 m³/h)
- Smoke CADR: 83 CFM (141 m³/h)
- Recommended coverage area: Up to 183 sq ft (17 m²) based on the AHAM standard of achieving 4.8 air changes per hour (ACH) in a room with 8-foot ceilings.
- Maximum coverage area (at 2 ACH): Approximately 366 sq ft (34 m²), suitable if the primary goal is odor reduction rather than particulate removal.
The three separate CADR ratings reflect the fact that particle size affects filtration efficiency. Dust particles (the largest category) and pollen particles are captured most efficiently by the HEPA layer. Smoke particles (the smallest category, down to 0.1 microns) are harder to capture at high velocity and produce the lowest CADR. For smoke-specific applications, wildfire smoke, tobacco smoke, the smoke CADR rating is the most relevant specification.
The Core 200S’s smoke CADR of 83 CFM places it in the lower range of performance for its form factor, which is a direct consequence of its compact motor and single-filter architecture. Larger units like the Core 300S (with smoke CADR of approximately 141 CFM) outperform it on smoke removal in larger spaces.
MOTOR AND FAN SPECIFICATIONS
The Core 200S uses a brushless DC (BLDC) motor, which is a meaningful engineering choice at this price point. BLDC motors offer longer service life, lower noise at equivalent airflow, and more precise speed control than brushed AC motors.
- Motor type: Brushless DC motor
- Fan type: Centrifugal impeller (not axial)
- Fan speed settings: 3 (Low, Medium, High) + Sleep mode (below Low)
- Sleep mode airflow: Near-silent operation below 25 dB
The centrifugal impeller design draws air radially inward from the 360-degree intake and accelerates it axially upward through the filter stack and out the top diffuser. This is aerodynamically more efficient for the Core 200S’s cylindrical geometry than an axial fan would be, it creates the consistent inward suction around the entire intake perimeter that the design depends on.
Fan speed and corresponding noise levels:
- Sleep mode: <25 dB
- Low: approximately 25–28 dB
- Medium: approximately 34–38 dB
- High: approximately 50–53 dB
The full motor and capacitor specifications, including winding resistance, capacitor rating, and motor replacement part numbers, are detailed in the companion guide Levoit Core 200S AC Capacitor and Motor Specifications, which is the relevant reference for repair technicians and advanced troubleshooting.
ELECTRICAL AND POWER SPECIFICATIONS
Input voltage: 120V AC, 60 Hz (North American standard)
Power consumption:
- Sleep mode: approximately 2W
- Low speed: approximately 8W
- Medium speed: approximately 20W
- High speed: approximately 40W
- Maximum rated wattage: 40W
The 40W maximum draw places the Core 200S in the ultra-low power consumption category for home appliances. Running at high speed continuously for 24 hours consumes approximately 0.96 kWh, less than one cent per hour at average US residential electricity rates. Annual operating cost at high-speed continuous operation (the maximum cost scenario) is approximately $40 to $60 USD, depending on local utility rates.
Power cord length: approximately 5.9 feet (1.8 m)
Plug type: Type A (two-prong, North American standard)
A comprehensive breakdown of the Core 200S’s voltage requirements, power consumption at each speed, Wi-Fi module power draw, and compatibility with non-standard US voltages is covered in the companion article Levoit Core 200S Setup, Wi-Fi Connection, Power Consumption & USA Voltage Guide.
FILTER SPECIFICATIONS
- Filter type: 3-stage composite unit
- Filter diameter: Cylindrical, designed to surround the central motor column
- Filter height: approximately 8.5 inches (21.6 cm)
- Filter part number (Levoit genuine): HEACAFLVNUS0033 (Core 200S replacement filter, Core 200S compatible)
The three stages, nylon pre-filter, H13 True HEPA layer, and activated carbon layer are bonded as a single unit and replaced as a single assembly. They are not individually separable for separate replacement.
Filter efficiency (HEPA layer): H13 grade captures ≥99.97% of particles ≥0.3 microns
Activated carbon weight: The carbon layer is a thin, bonded sheet rather than a granular bed; it provides effective light-to-moderate odor reduction but is less effective for heavy odor loads than thick granular carbon filters.
Recommended filter replacement interval: Every 6–8 months under normal use (approximately 12 hours/day operation). The machine tracks runtime and illuminates the filter indicator light when replacement is due. The filter indicator is driven by hours of operation, not air quality data it is a fixed-interval timer, not a contamination sensor.
SMART CONNECTIVITY SPECIFICATIONS
- Wi-Fi standard: 2.4 GHz 802.11 b/g/n (does not support 5 GHz networks)
- App platform: VeSync (iOS and Android)
- Smart home integrations: Amazon Alexa, Google Assistant
- Bluetooth: Not used for primary connectivity; some variants use Bluetooth for initial pairing only
The 2.4 GHz-only Wi-Fi specification is a deliberate choice for IoT devices in this category. 2.4 GHz provides better range and wall penetration than 5 GHz, which is advantageous for devices placed in bedrooms or rooms distant from a router. The trade-off is lower maximum bandwidth, which is irrelevant for a device that transmits only control signals and sensor readings.
The Wi-Fi module inside the Core 200S its chipset, antenna design, and firmware communication protocol with the VeSync cloud infrastructure is examined in detail in the companion guide, The Wi-Fi Module Component inside Levoit Core 200S: How it Works.
SENSOR SPECIFICATIONS
- Air quality sensor: Infrared particulate sensor (not laser particle counter)
- Sensor output: Three-band indicator Blue (Good), Orange (Moderate), Red (Poor)
- Sensor location: On the rear lower body of the unit
The infrared sensor in the Core 200S estimates particle density in the air near the intake using a light scatter measurement. It is a qualitative sensor it detects relative particle load and outputs a three-band color reading rather than a numeric PM2.5 or PM10 value. It is adequate for triggering Auto mode fan speed adjustment, but should not be relied upon for precision air quality measurement. In Auto mode, the fan speed responds to sensor readings by increasing to High when the sensor reads Red and reducing to Low or Sleep when it reads Blue.
CERTIFICATIONS AND COMPLIANCE
- CARB certified: Yes (California Air Resources Board confirms the unit does not produce harmful ozone levels)
- AHAM verified: Yes (CADR ratings are AHAM-certified, not self-reported)
- FCC certified: Yes (for Wi-Fi transmitter)
- UL listed: Yes
- Energy Star: Not listed (the Core 200S is not Energy Star certified as of the current product generation)
The CARB certification is particularly important for consumers concerned about ozone output. Some air purifiers use UV-C or ionizer technologies that produce ozone as a byproduct. The Core 200S produces no ozone its filtration is purely mechanical (physical particle capture) and chemical (carbon adsorption), with no ionizing or UV components.
COMPLETE SPECIFICATIONS TABLE
| Specification | Value |
| Height | 11.8 in (30 cm) |
| Base Diameter | 7.5 in (19.1 cm) |
| Weight (with filter) | 5.73 lbs (2.6 kg |
| Coverage Area (4.8 ACH) | 183 sq ft (17 m²) |
| Dust CADR | 95 CFM (161 m³/h) |
| Pollen CADR | 98 CFM (166 m³/h) |
| Smoke CADR | 83 CFM (141 m³/h) |
| HEPA Grade | H13 (≥99.97% @ 0.3 microns) |
| Motor Type | Brushless DC |
| Fan Speeds | Sleep / Low / Medium / High |
| Noise Level (Sleep) | <25 dB |
| Noise Level (High) | ~50–53 dB |
| Input Voltage | 120V AC / 60 Hz |
| Max Power Draw | 40W |
| Wi-Fi Band | 2.4 GHz (802.11 b/g/n) |
| App | VeSync |
| Filter Replacement Interval | 6–8 months |
| Filter Part Number | HEACAFLVNUS0033 |
| Certifications | CARB, AHAM, FCC, UL |
